Preparing for Your RV Inspection
An RV inspection will provide you a thorough examination of the RV from the roof to the tires, inside and out. Depending on the type of RV you are purchasing, expect the inspection to take between 3 and 8 hours to complete.
 
You are welcome to be there during the inspection, however, it is not required. If you are not there, the inspector will contact you with a verbal report once the inspection is completed. Your written report and photos will be emailed to you within 24 to 48 hours, sooner if required. Please note: fluid tests take longer to complete.

The following will allow us to perform a complete inspection:

  • Position the RV on a flat surface where the leveling system can be checked.

  • Provide all maintenance records and vehicle manuals as available.

  • Plug the RV into 30 or 50 amp power.

  • Connect water hose if possible.

  • Put water in the water tank.

  • Empty black and gray water tanks.

  • Connect sewer hose if possible.

  • Provide enough propane to run all systems.

  • Make sure there is fuel to run the generator [above 1/4 tank].

  • Have batteries charged-up.

  • Turn on the refrigerator and ice maker at least 12 hours prior to inspection.

  • Empty the oven and the microwave.

  • Have all remote controls available.

  • Keys to the RV should be on hand in case they are needed.

240_F_281734740_QbD6ThhCTC0ozNxsrQz24MDs
240_F_294664652_QoRLMjgI9FlA7RASstH6RKzN
Your assistance is appreciated! We look forward to serving you!!